Black Hematite Pendant
Sometimes there is a need for new jewelry, and the best solution would be to do something new with your own hands! You can vary your image and complement the clothes of blue and black colors. This pendant is especially suitable for a dress.
For the manufacture of such a pendant, you need hematite with a length of 3 cm and with a hole inside the stone, also beads with a diameter of 4 mm, a thick wire with a diameter of 1 mm and a length of 12 cm, then a thinner wire with a diameter of 0.7 mm and a length of 8 cm and thin wire with a diameter of 0.1 mm 50 cm long
1. First, we use a thick wire to create the basis of our pendant: to do this, we place our black hematite stone on the wire, leave the end of the wire 3 cm long and bend the wire to the left around the stone. Then we move from point 1 to point 2: to do this, we make a loop around the remaining free end of the wire and bend the wire to the right of the stone. You can bend it with your hands, because the wire is copper and quite soft. At the end we wrap a beautiful bend with round pliers, like a treble clef.
2After that, the remaining end of the wire is wrapped with round pliers so that a loop is formed to hang our pendant.
3. Bend the wire beautifully around the eyelet and cut off the unnecessary
4. Now it is the turn of the wire that is thinner: we bend the loop at the base with round-nose pliers and string the beads on it. With the thinnest wire, we fasten the wire thinner to the base of the pendant by 2-3 turns and, for beauty, there are 5 turns under the beads.
5. Then we pass this way to the end. The result is visible in the photo. In the end, we make a small loop at the end of a thinner wire, the same as in the beginning.