In the warehouse broke manual forklift (it is also called the stacker). When pumping up, it very slowly lifts the load, in the cold of the hands it is terribly freezing during this time. What could be the problem and where in Yekaterinburg to find details from such mechanisms?
There are 5 answers
Answered on February 20, 15:04
Most likely a problem with a hydraulic pump. It must be cleaned and oiled from time to time. Check that the pressure switch, valves, pump regulators are in order.
Answered on February 20, 15:09
Can a snap ring come off? It should hold tightly to the cuff of the cylinder. In this case, you will need to disassemble the mechanism and change the cuff, it is usually made of polyurethane, inexpensive.
Answered 20 February 15:18
Maybe it's time you change the technique to a more modern one? If you work on the street or in a cold room, you need an electric stacker, for example:. Maybe this will suit you? And do not have to freeze or puzzle over mending. You can of course try to do it yourself (with the help of an electric motor), but you need to have this talent.