Eyeglass case

To make a wonderful loved one does not necessarily leave the house. You can decorate, for example, a plastic box, previously served as a watch case or a removable panel of car radio. The old box with the active participation of stationery, the remains of velvety fabric and rhinestones for half an hour turn into an amazing beauty gift.
Materials for work:
  • Box - 1 pc .;
  • The fabric is velvety in size of the inner part of the cover multiplied by 2;
  • Gouache paint "bronze", glue "liquid nails", narrow stationery tape, sponge for washing dishes, alcohol-containing liquid, matches, brush, black marker, rhinestones, tweezers.

Stages of work:


The first stage: preparation of the front surface.


Carefully my box, remove all stickers, degrease with alcohol-containing liquid.
Eyeglass case

Bottom boxes pasted narrow tape around the perimeter. Carefully smooth the edges, so that the paint under the tape did not fall.
Eyeglass case

The second stage: the decor of the front side of the box.


Along the edges of the entire box we will sponge with a bronze paint sponge.
Eyeglass case

Eyeglass case

Select the picture you like and transfer it to the surface of the box (in this case, a napkin is used for decoupage).
Eyeglass case

We increase the decor of the edge, slightly adjusting it under the applied pattern.
Eyeglass case

Paint over the middle of the lid. The edges of the solid paint, retreating a little, decorate with dot painting. This can be done using a sushi stick, dipping it in paint and putting down 2-3 points.
Eyeglass case

In the central part of the solid we make the decoration in the form of an inscription with a marker or black paint.
Eyeglass case

The back of the box is completely dabbed with bronze paint. For a more uniform coating it is necessary to impose several layers, each dried.
Eyeglass case

On large leaves draw black streaks.
Eyeglass case

The third stage: decorate with rhinestones.


On the bitmap stick small rhinestones. To glue the surface and rhinestones, we use the glue “liquid nails” by dipping the stick first into the glue, then applying it to the surface of the bitmap.
Eyeglass case

For large point roundings we glue larger crystals.
Eyeglass case

Rhinestones decorate the bitmap selectively.
Eyeglass case

We varnish the front side of the box and the bottom. We dry.
Eyeglass case

Carefully remove the tape, trying not to damage the edges of the picture.
Eyeglass case

The fourth stage: decorate the inside of the box.


Degrease and clean the inner surface of the box.
Eyeglass case

From the paper we make a pattern of the bottom of the upper and lower parts. Putting the pattern on the wrong side of the fabric and outlined with a marker. Cut out.
Eyeglass case

Gently burn the edges of the fabric to avoid shedding it.
Eyeglass case

Fill the surface to be decorated with glue "liquid nails", distribute it over the entire surface evenly, carefully smear the edges around the perimeter. The layer of glue should not be very thick, otherwise the fabric will get wet and become “stone”. We put the fabric and smooth it, pressing it slightly.
Eyeglass case

With a stick we remove the excess glue and carefully press the junction of the fabric and the box.
Eyeglass case

To remove the clarity of the fabric transition boundaries, tint its edges around the perimeter with a marker. Since the fabric is fleecy, we move the marker in the direction of the pile. Otherwise, the pile will be folded and the pattern will turn out to be “shaggy” uneven.
Eyeglass case

In the center of the top cover, make an inscription with a marker.
Eyeglass case

Apply a couple of layers of bronze paint over the inscription.Pile must necessarily soak, all the "furry" smoothed.
Eyeglass case

Eyeglass case

That turned out to be a wonderful personalized gift, very necessary in everyday life.
Eyeglass case

Related news

Eyeglass case image, picture
Eyeglass case 54


Eyeglass case 47


Eyeglass case 85


Eyeglass case 30


Eyeglass case 72


Eyeglass case 17