We change jeans on the kid the hands

Jeans ... They have already become so firmly established in our lives and “settled” in the wardrobe that it’s fit to say in words with a classic: “How much in this word for the Russian heart has merged ...”. Indeed, probably, everyone has at least one, but favorite jeans.
However, sometimes, we are wearing this favorite thing to such a state when, it seems, it is impossible to wear it already, but it is also a pity to throw it away. To extend the life of jeans in this situation will help the ability to cut and sew. Only here the thing will be altered on the baby.
Too worn and tacky places on the jeans pants can be bypassed in a cut without compromising the look of the product. But the child runs for some time in a new dress (until he grows up), and the family budget will be saved, just for new jeans for dad or mom.
We alter jeans on the kid

In general, from jeans of an adult man, with a clothing size not less than the 50th, it is quite possible to carve out pretty loose trousers for a child of 1.5-2 years old.
Details of the cut of children's jeans will differ little from adults:
  1. Front halves of trousers;
  2. Back halves of trousers (single-cut according to the model with a belt);
  3. Cutting barrel (one-piece with the top lining of the side pocket);
  4. Upper lining of the side pocket (from finishing fabric);
  5. Belt front pants;
  6. Kneecaps;
  7. Kant for a decor of kneecaps (from finishing fabric);
  8. Adjusting strip for decoration of the knee pads (made of finishing fabric).

All the details, except No. 5 and No. 8, are cut off by pairs in mirror reflection.
The pattern of children's trousers can be downloaded from the Internet or copied using the proven sewing magazine for kids.
We change jeans on the kid

The edging for the kneecap decor is a strip 2.5 cm wide and a length slightly larger than the width of the kneecap itself. Each blank for the edging should be zayuyuzhit along the length, and then stitch to the upper edge of the knee seam 1 cm.
After that, allowance of the seam of the stitching of the edge must be pressed in the direction of the inside of the knee. The result will be a neat edge and a narrow edging.
We alter jeans on the kid

Then the stitch strip for the decor of the knee pads should be ironed one long edge 1 cm in the side of the wrong side.
An ironed strip should be cut into 2 equal parts (in width). Each part must be set up at the bottom of the knee pad with a corner, as shown in the photo.
We change jeans on the kid

Knee pads prepared in this way should be set on the front halves of jeans.
The lower cut of each knee pad should be folded similarly to the top. For ease of operation, the knee pads can first be pinned or pinned to the main part with pins.
After attaching the knee pads should be gently ironed from the front and wrong side.
We change jeans on the kid

After that, you can proceed to the processing of side pockets with a side cut.
First of all, you need to duplicate the allowance for processing the entrance to the pocket. For this purpose, ideally suitable narrow strip of adhesive strip, glued from the inside of the part.
We alter jeans on the kid

Then the upper lining should be attached to the pocket entrance. The stitching joint is 5-7 mm. Details should be equalized by the cut and face each other.
We alter jeans on the kid

Attached lining should be turned on the wrong side of jeans and ironed, straightening a narrow piping, similar to the piping on the knee pads.
Then you need to put a finishing line (you can two) at the entrance to your pocket.
We change jeans on the kid

Next, you need to pratach pruned barrel. To do this, it must be put on the upper lining of the pocket (wrong side - to the wrong side), equalized with cuts and sewed with a 5 mm suture.
We alter jeans on the kid

Next, the lining must be turned out, straightening allowances. If necessary, the seam can be ironed. Along the edge of the lining of the pocket you need to lay a machine line with a width of 7-10 mm. The stitch length should be medium or slightly less. Such a line would be better to “hold” the fabric, it will not soon tear or wear out.
We change jeans on the kid

The processed pocket needs to be fixed with an auxiliary line along the top and side sections of the trousers. At the same time you need to fix the tucks on the waist, provided by the jeans model.
We alter jeans on the kid

Similarly, it is necessary to prepare the second front half of the pants.
We alter jeans on the kid

Then they need to be interconnected along the middle seam, the allowance of which needs to be swept and ironed.
We change jeans on the kid

Belt for trousers can be cut directly from the belt of jeans, from which they are intermixed, with the difference, however, that the children's belt should be an order of magnitude already. In ready-made form it can be made 2.5 cm. For a baby this width will be quite enough.
Belt length must be pressed in half. One longitudinal edge should be swept over.
We alter jeans on the kid

The stitched belt should be sewn to the upper edge of the trousers with a ribbed edge. The stitching seam is 1 cm. The seam allowance should be pressed upwards. This will simplify further processing.
We alter jeans on the kid

We alter jeans on the kid

The obturated edge of the belt should be bent around the upper edge of the front of the trousers.
The belt allowance should overlap the seam of its attachment by 1 cm. For convenience, the curved belt can be marked or pinned with pins.
On the bottom edge of the belt should be given a finishing line. If necessary, the belt can be ironed on the wrong side.
We alter jeans on the kid

The preparation of the back halves of the trousers includes only 2 operations. First you need to connect them to each other along the seam of the seat (preferably, if the line is double, for durability). Then you need to sweep over the lower section of the belt, and iron the belt on the wrong side of the product by 3.5 cm.
We alter jeans on the kid

Then you should proceed directly to the installation of trousers.
First of all, you need to stitch the side seams of the product. The back half belt allowance should bend around the front halves by 3.5 cm. Seam allowances should be swept over.
After that, you can process the step seams of the trousers (both at the same time).
We alter jeans on the kid

To the ends of the belt of the rear halves need to stitch 2 narrow or one wide (up to 2.5 cm) elastic band.
We alter jeans on the kid

Then the belt allowance should be turned inside out, the gum inside the resulting drawstring should be stabbed evenly, and one or two finishing stitches should be laid along the belt itself.
We alter jeans on the kid

Trousers need to turn on the front side. Side and stepped seams should be ironed on a special block through the ironer.
At the same time, it is necessary to press the allowance for the hem of the bottom, - 4 cm. For convenience, it can be knotted and stabbed with pins in several places.




Related news

We change jeans on the kid the hands image, picture
We change jeans on the kid the hands 70


We change jeans on the kid the hands 80


We change jeans on the kid the hands 29


We change jeans on the kid the hands 90


We change jeans on the kid the hands 4


We change jeans on the kid the hands 62